一级淫片免费视频-一级淫片在线观看-一级在线 | 欧洲-一级在线观看视频-美女一级牲交毛片视频-美女伊人网

首頁 產品展示>Perkins珀金斯900 3.152柴油發動機41314187機油泵

Perkins珀金斯900 3.152柴油發動機41314187機油泵

Perkins珀金斯900 3.152柴油發動機41314187機油泵供應商,Perkins珀金斯900 3.152柴油發動機41314187機油泵技術價格規格咨詢服務,Perkins珀金斯900 3.152柴油發動機41314187機油泵零配件供應,Perkins珀金斯900 3.152柴油發動機41314187機油泵售后服務中心,Perkins珀金斯900 3.152柴油發動機41314187機油泵,Perkins珀金斯900 3.152柴油發動機41314187機油泵詳細的技術參數,
產品咨詢

詳細描述

項目   零配件號碼    最新件號   描述  

    1   41314187   1   41314187   油泵         

    9   0746355    3   0746355    螺旋         

    11  41115086   1   41115086   惰輪傳動機構        

    13  0180831    1   0180831    夾        

    14  34711129   1   34711129   油管         

    15  33532121   2   33532121   螺帽         

    16  0560244    2   0560244    橄欖         

    17  0920053    3   0920053    墊圈         

    項目   零配件號碼    最新件號   描述  

    2      1      泵體         

    3      1      傳動機構         

    4   32712715   1   32712715   柱塞         

    5   31742128   1   31742128   彈簧         

    6   33157122   1   33157122   帽        

    7   0610012    1   0610012    銷        

    8   2415811    1   2415811    密封 - O 的圈       

9.  Loosen the nut in order to release the pressure

on Tooling (B). Remove electronic unit injector

clamp (1) and Tooling (B) from the electronic unit

injector sleeve.

10. Ensure that all of the valves are secured in place

by valve springs, valve rotators and valve keepers.

Rotate the crankshaft through approximately 45

degrees in order to clear  the valves from the

piston. Lightly strike the top of the valves with a

soft faced hammer in order to  ensure that the

valve keepers are properly installed.

End By:

a.  Install the electronic unit injectors.  Refer to

Disassembly and Assembly, “Electronic  Unit

Injector - Install”.

i02754776

Inlet and Exhaust  Valves -

Remove and Install

g01380893

Illustration 37

Improper assembly of parts that are spring loaded

can cause bodily injury.

Removal Procedure

To prevent possible injury, follow the established

assembly procedure  and wear  protective equip-

ment.

Table 10

Required Tools

Part

4.  Install spring seats (7).

Tool

Number

Part Description

Qty

A

-

Valve Spring Compressor

1

5.  Install inner valve springs (6) and outer  valve

springs (5).

Start By:

6.  Position valve rotators (4) on the valve springs.

a.  Remove the cylinder head. Refer to Disassembly

and Assembly, “Cylinder Head - Remove”.

7.  Position electronic unit injector clamp (1)  on

Tooling (B). Install Tooling (B) into the electronic

unit injector sleeve.  Tighten the bolt on the

electronic unit injector clamp in order to secure

Tooling (B).

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause  rapid wear and  shortened

component life.

The  valve  spring  keepers  can  be thrown  from

the  valve when  the valve  spring  compressor is

released.  Ensure that  the  valve  spring  keepers

are properly installed  on the valve stem.  To help

prevent personal injury, keep away from the front

of  the  valve  spring keepers  and  valve  springs

during the installation of the valves.

8.  Tighten the nut on Tooling (B) in order to compress

the valve springs. Install valve keepers (3).

This document has been printed from SPI². Not for Resale


 

22

KENR6906

Disassembly and  Assembly Section

2.  Carefully remove Tooling (A).

3.  Remove valve rotator (2).

4.  Remove outer valve spring (3) and inner valve

spring (4).

5.  Repeat Steps 1 through 4 in order to remove the

remaining valve springs.

6.  Remove spring seats (5).

7.  Remove valve stem seals (7).

8.  Remove valves (6) from the cylinder head.

g01395727

Illustration 38

Typical example

Installation Procedure

Table 11

Required Tools

Part

Tool

Number

Part Description

Qty

A

-

Valve Spring Compressor

1

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause  rapid wear and  shortened

component life.

1.  Inspect the valve springs for the correct length.

Refer to Specifications, “Cylinder Head Valves ”

for more information.

Note: Valve springs must be replaced in pairs for the

inlet valve or the exhaust valve of each cylinder.

2.  Inspect the valves. Refer to  Specifications,

“Cylinder Head Valves” for more information.

g01392788

Illustration 39

Personal injury  can result  from being  struck by

parts propelled by a released spring force.

Make sure to wear all necessary protective equip-

ment.

Follow the  recommended procedure  and use all

recommended tooling to release the spring force.

1.  Install Tooling (A) and compress the valve springs.

Remove valve keepers (1).

This document has been printed from SPI². Not for Resale


 

KENR6906

23

Disassembly and  Assembly Section

6.  Install inner valve spring (4) and outer valve spring

(3).

7.  Position valve rotator (2) on the valve springs.

8.  Use Tooling (A) to compress the valve springs.

Install valve keepers (1).

9.  Repeat Steps 6 through 8 in order to install the

remaining valve keepers.

The  valve  spring  keepers  can be  thrown  from

the  valve when  the valve  spring  compressor is

released.  Ensure that  the  valve  spring  keepers

are properly installed  on the valve stem.  To help

prevent personal injury, keep away from the front

of  the  valve spring  keepers  and  valve  springs

during the installation of the valves.

10. Carefully remove Tooling (A). Lightly strike the top

of the valve with a soft faced hammer in order to

ensure that valve keepers (1) are properly seated.

End By:

g01392788

Illustration 40

a.  Install the cylinder head. Refer to Disassembly

and Assembly, “Cylinder Head - Install”.

i02754778

Inlet and Exhaust Valve Guides

- Remove and Install

Removal Procedure

Table 12

Required Tools

g01395727

Illustration 41

Tool

Part Number

Part Description

Qty

Typical example

A

CVT0001

Valve Guide Driver

1

Start By:

The valve keepers  can be thrown  from the valve

when the valve spring compressor is released. En-

sure that the valve keepers are properly  installed

on the valve stem. To help prevent personal injury,

keep away from the front of the valve keepers and

valve springs during the installation of the valves.

a.  Remove the inlet and exhaust valves. Refer to

Disassembly and Assembly, “Inlet and Exhaust

Valves - Remove and Install”.

NOTICE

Keep all parts clean from contaminants.

3.  Lubricate valves (6) with clean engine oil. Install

the valves to the cylinder head.

Contaminants may cause  rapid wear and  shortened

component life.

4.  Install valve stem seals (7) to valves (6).

5.  Install spring seats (5) to the cylinder head.

This document has been printed from SPI². Not for Resale

 

免費熱線
400-082-9096?
整機銷售
0731-84424871? 18374999699
售后維修
0731-84424872? 15580888444
配件銷售
0731-84424873? 18274802060
手機端
微信公眾號
主站蜘蛛池模板: yy6080三级理论韩国日本 | 最新午夜 | 最近新韩国hd视频 | 你懂的手机在线视频 | 国产亚洲精品成人一区看片 | www激情五月 | 亚洲一区二区三区影院 | 亚洲色图综合 | 久久成人亚洲 | 婷婷六月色 | 午夜在线观看免费视频 | 欧美性生活网站 | 免费视频色 | 免费亚洲一区 | 国产美女精品久久久久中文 | 国产网红主播chinese | 黄在线观看在线播放720p | 一二三区电影 | 中文字幕不卡免费高清视频 | 亚洲精品美女久久久久网站 | 狠狠躁夜夜躁人人爽天天3 狠狠躁夜夜躁人人爽天天段 | 一区二区三区四区欧美 | 四虎影院永久 | 又粗又大又爽又色又过瘾视频 | 欧美大片国产在线永久播放 | 四虎网站最新网址 | 一区视频 | 久久久久88色偷偷免费 | 免费抓胸吻胸激烈视频网站 | 免费毛片网 | 在线视频精品视频 | 国产毛片久久久久久国产毛片 | bt天堂网在线 | 国内自拍露脸普通话对白在线 | 夜操| 成人毛片一区二区三区 | 黄色午夜网站 | 亚洲入口无毒网址你懂的 | 久久综合欧美成人 | 特黄大片aaaaa毛片 | 欧美激情αv一区二区三区 欧美激情第一欧美在线 |